|
|
Post by quietman on Nov 7, 2022 15:42:02 GMT
|
|
|
|
Post by quietman on Nov 7, 2022 15:44:58 GMT
|
|
|
|
Post by Adam on Nov 8, 2022 13:06:50 GMT
Great resources. I haven't gotten into Resin Printing. Are you doing that now?
|
|
|
|
Post by Jim Teeple on Nov 8, 2022 16:28:37 GMT
I have been researching 3D Printing and Resin printing looks like the way to go
But man is it labor intensive, cleaning and straining and ventilation requirements
but the end product is quite remarkable.
|
|
|
|
Post by quietman on Dec 5, 2022 14:07:38 GMT
The cleaning and straining isn't as much work as the videos make it appear. Especially when you have a rack for pouring the resin back in the bottle. I found one on thingiverse and printed it on my fdm printer. Also, plant based resins give excellent results and have no where near the odor of standard resins. On company makes carbon filters with a fan you can set inside the cover. And keep in mind, the print size needed will be determined by what you want to make. It's also not a set up and go at the beginning. You will have failed prints, but once you get things dialed in, failures become rare. Would recommend a mono printer, as the print times are much quicker. Here's the vat draining rack (I printed mine with white filament). Attachments:
|
|
