|
|
Post by atsda on Sept 16, 2024 3:11:42 GMT
Tonight. I wired the 90 controller to the whistle shack. Tomorrow, I will wire it to another 90 controller at the main panel location (next to the other horn controller. Eventually, most of the manually controlled accessories, will be simultaneously wired to pressure controllers or insulated track sections. Alfred
(While flagrantly ignoring all of mrmeeps electrical cautions.)
|
|
|
|
Post by atsda on Sept 23, 2024 19:50:40 GMT
 Photo 1: The platform (not in place yet) is for the shelf that is under the transformers at the Main Control area. The 1033 transformer is for auxiliary train and accessory power. The two controllers are for UCS for operating cars. Not shown is a small panel that sits on top with other control buttons. The toggles are for cutting track power from various transformers and for isolating sidings and block control. You can reach these controls while standing at the transformers – with a slight bend. Photo 2: is the installed Secondary Control Panel for my granddaughter and guests to use as they enter the train room. Buttons operate – whistle, horn, gateman, ringing bell banjo signal and operating car track; shown is a O22 switch controller (left) and 1033 transformer (right). The panel is mounted at about 32”.b Attachments:
|
|
