Post by Adam on Apr 7, 2024 14:38:25 GMT
SOLD
Sweetening the deal by combining them and adding a Mini Commander from ERR
For $175 Shipped CONUS, you get all of the following items. All works. There is one minor issue with two of the screw-down wire connectors (they won't screw down) on Arduino Motor Shield that won't prevent you from using it. You can solder the wires in as a workaround or do a bit of work to fix the screw-downs.
Includes the following:
Most items have some use, but all were working the last time I used them.
Two (2) Raspberry Pi 3B’s - each with a case, a 256BG memory card and power supply. Older generation but still very usable.
One (1) Arduino Uno R3
One (1) Ardunio Motorshield R3
One (1) Elegoo Uno R3 – This is one of the better Arduino Uno clones.
Two (2) Cytron Shield-MD10 – One of the better Arduino Motorshield R3 clones. One is unopened/unused.
One (1) GPIO Breakout board with ribbon cable for the Raspberry PIs
One (1) Nooelec NESDR SMart XDR USB Ham Radio Receiver
Two (2) NCE D408SR 10Amp Decoders. One of them is unopened. The other I experiment with but should still be in working order.
One 3-pack of Bachmann E-Z Command 1Amp Decoders. It is opened, but I only experimented with one of them. This set had the bare wires, not the 8-pin plug.
One ERR Mini Commander Board (this might be the version II but I am not sure).
Sweetening the deal by combining them and adding a Mini Commander from ERR
For $175 Shipped CONUS, you get all of the following items. All works. There is one minor issue with two of the screw-down wire connectors (they won't screw down) on Arduino Motor Shield that won't prevent you from using it. You can solder the wires in as a workaround or do a bit of work to fix the screw-downs.
Includes the following:
Most items have some use, but all were working the last time I used them.
Two (2) Raspberry Pi 3B’s - each with a case, a 256BG memory card and power supply. Older generation but still very usable.
One (1) Arduino Uno R3
One (1) Ardunio Motorshield R3
One (1) Elegoo Uno R3 – This is one of the better Arduino Uno clones.
Two (2) Cytron Shield-MD10 – One of the better Arduino Motorshield R3 clones. One is unopened/unused.
One (1) GPIO Breakout board with ribbon cable for the Raspberry PIs
One (1) Nooelec NESDR SMart XDR USB Ham Radio Receiver
Two (2) NCE D408SR 10Amp Decoders. One of them is unopened. The other I experiment with but should still be in working order.
One 3-pack of Bachmann E-Z Command 1Amp Decoders. It is opened, but I only experimented with one of them. This set had the bare wires, not the 8-pin plug.
One ERR Mini Commander Board (this might be the version II but I am not sure).
